BP2000 POWDER™ - Pure powder lubricant with a natural bonding affinity
for metals. BP2000™ is for trigger jobs and fine tuning the surfaces
of
bores and bolts, etc. When used with SMOOTH-KOTE™, friction is reduced
by as much as an additional 20%, compared to oiled surfaces.
What is BP-2000 Powder™ :
BP2000 POWDER™ is pure powder lubricants, which have a natural affinity
for metals. Based on solid lubricant and dry film technology, it is specially
prepared with strict controls on particle size and chemical composition. BP2000™
is the finest lubricating powder available.
Directions:
Clean surfaces well; use a cleaner that leaves no residue, or use alcohol
to rinse the cleaned surfaces before treating. Allow surfaces to dry. Apply
a
small amount of BP2000 POWDER™ to a clean patch or clothe and briskly
rub the powder into the metal surface. For tight spaces, dip a cotton
swab into powder and work into the surfaces.
Note:
Surfaces treated with BP2000™ will have a silvery gray mirror like finish.
If in doubt about color, test on an interior surface. To maintain surface:
use
a dry, nylon-bristle brush to remove dirt & residues. Surface can then
be touched up with BP2000™. BP2000™ is not a permanent coating;
it can be
removed using conventional cleaning solvents. To clean hands the use of a
waterless hand cleaner is recommended, followed by mild soap & water.
Please Note:
Toxicological studies, industrial experience and chemical properties all indicate
that BP2000 POWDER™ is a relatively harmless material.