Mark 4 CQ/T

For accurate engagement of close-to mid-range targets.

Leupold’s Mark 4® CQ/T™ 1-3x14mm is a revolutionary optical sight for tactical firearms such as the AR15 and M16, combining the strengths of a
red dot sight and a variable-power riflescope. Developed in cooperation with elite military forces and law enforcement agencies from around the globe,
it was created to help you accomplish a range of missions you can’t tackle with any other single scope.

Use the Mark 4® CQ/T™ at 1x and it functions as a non-magnifying, illuminated sight for tactical scenarios or engaging targets at extremely close range.
The Mark 4® CQ/T™ has a true 1x setting, allowing you to use it with both eyes open. The clear, bright Circle Dot reticle is a bold aiming point for the
operator, ensuring instant target acquisition in close, quick encounters.

Dial up to 3x and you can accurately engage targets at medium ranges. This is where the unique Circle Dot reticle comes into its own. The dot is an ideal
size to ensure fast target acquisition, and you can use the circle’s edge to lead targets at long distances. You can also use the Circle Dot reticle to estimate range.

Truly, there’s no other scope like it. Only the Mark 4® CQ/T™ is ready and able to handle the variety of situations most common to both law enforcement
and the military.

What makes the Mark 4® CQ/T™ revolutionary:

One AA battery powers the Mark 4® CQ/T™ for up to seven hours of continuous use (on the highest intensity setting)
Reticle is visible when not illuminated (no batteries required to use the scope)
Ten illumination settings match any light conditions without overwhelming your natural low-light vision; two low-intensity settings work with night-vision devices
Battery check to determine battery life
Large field of view for fast target acquisition and tracking of moving targets
Mounts to MIL-STD-1913 rail bases (with optional mounting hardware), AR15s and M16s with handles, and similar firearms
Attach accessories to the Mark 4® CQ/T™ (such as a laser designator, flashlight, or night-vision device) using the integrated MIL-STD-1913 rail mount cross slots
Windage and elevation adjustments can be made in 1/2-MOA “clicks” — the clicks are both audible and tactile.
Legendary Leupold ruggedness.
Eye relief optimized for M16 variant cheek weld — mount the scope in the preferred middle receiver position.
DiamondCoat scratch-resistant lens coating on all exterior lens surfaces; Multicoat 4 on all interior lens surfaces to maximize light transmission.
Absolute waterproof integrity.

Battery

Battery can be quickly and easily replaced in the field without tools (extra battery packs available: p/n 52644).

Range estimating with the Mark 4 CQ/T:

Range estimating using the Leupold Mark 4® CQ/T™
scope is simple. Place the target inside the circle of
the Mark 4® CQ/T™ reticle. At 3x, the diameter equates
to 6 feet in height at 100 yards. At 200 yards, 6 feet is measured from the dot to the edge of the circle.

The Circle Dot Reticle

The Circle Dot reticle of the Mark 4 CQ/T is designed to offer fast target acquisition in any environment.

Dot Size: 3 MOA at 3x, 9 MOA at 1x.

Circle Size:
Edge to edge, the subtension of the circle is 18 inches at 25 yards, or 6 feet at 100 yards when set on 3x. From the center of the dot to the
edge of the circle, the subtension is 6 feet at 200 yards when set on 3x.

Circle Line:
The width of the line creating the circle is large enough to be easily visible, but thin enough so as not to obliterate an
18-inch object at 500 yards when set on 3x.

Mark 4 CQ/T Specifications:

Weight
17.5 oz (w/o battery or mount)
Length (at zero diopter)
8.75 in
Finish
Matte
Circle Dot Reticle
DOT SIZE
9 MOA at 1x, 3 MOA at 3x
CIRCLE SIZE
Edge to edge, subtension of circle is 18 inches at 25 yards, or 6 feet at 100 yards at 3x. From the dot's center to the circle's edge, subtension is 6 feet at 200 yards at 3x.
CIRCLE LINE
Width of the line creating the circle is large enough to be easily visible, but thin enough so as not to obliterate an 18-inch object at 500 yards at 3x.
Ocular Adjustment Range
-2.0 to +0.5
Parallax Adjustment
Non-adjustable (factory set to 150 yards)
Parallax Adjustment Range
N/A
Windage Dial Adjustment Increment
1/2-MOA
Elevation Dial Adjustment Increment
1/2-MOA
Total Windage Adjustment Travel
80-MOA minimum
Total Elevation Adjustment Travel
80-MOA minimum
Magnification
1x - 3x
Field of View at 100 yards
116.6 ft at 1x, 84.3 ft at 3x
Field of View at 100 meters
38.9 m at 1x, 28.1 m at 3x
Eye Relief
2.8 in (71mm) at 1x, 2.0 in (51mm) at 3x

Mark 4 CQ/T is available in the following models:

Mark 4 CQ/T 1-3x14mm (p/n 52155)
Mark 4 CQ/T 1-3x14mm (Certified) (p/n 54246)

Leupold Mark 4 CQ/T (Certified) Special Military and Law Enforcement
Five Year Warranty

Certain Leupold scopes are put through additional ASQ testing to allow them to be sold with Certificates of Compliance. These scopes are intended for
use only by military and select law enforcement personnel in the course of their duties, which are assumed to encompass extremes of both usage and
environment. In accordance with this, the Leupold Full Lifetime Guarantee on these products is hereby modified to become the Leupold Special Military
and Law Enforcement Five Year Warranty and is limited to a duration of five years.

Mark 4® CQ/T™ Scope Cover

The same as our other popular scope covers, it is designed specifically to fit the Mark 4® CQ/T™. Easy to put on and remove, the black
neoprene sleeve protects your scope from dirt and moisture.

Back